- Square, burr-free and cold machining process
- Deformation-free clamping system for tubes and pipes
- Optimum preparation for the automated welding process
- Sturdy design with powerful drive
- Unique and automated orbital cutting process
- Simultaneous or seperate cutting and beveling
- Cost-effective, increasing productivity
- Even longer tool life
Application range GF 4 (AVM/MVM)
Pipe OD 12 - 120 mm (0.472 - 4.724 INCH)
Wall thickness (depends on material)*
1 - 9 mm (0.039 - 0.3,54 inch)
Pipe ID min. (saw blade 63mm / 2.480inch
21mm (0.827inch)
Pipe iD min. (saw blade 68mm / 2.677inch
16mm (0.630inch)
Pipe ID min. (saw blade 80mm / 3.150 inch)
4mm (0.157inch)
- Portable & Lightweight, Single person lift.
- Everything pre-connected & ready to use.
- Rapid change Conical Inlet Nozzles.
- Easy to use single instrument panel with menu driven interface.
- Configurable settings include:
Ambient conditions, sensor damping, units of measure,
data record rate.
- Able to measure flow in STD conditions or Actual conditions.
Four operating languages: English, German & Spanish
Only return the electronic instrument panel for annual calibration.
- Entire unit can fit in the boot of a small hatchback car
Standards: EN 1507/12237, DW/143, SMACNA
Volume Measurement: 1 to 150 L/s – over Nozzle Range
Typical Duty Points: 70 L/S at 2000 Pa – 140 L/s at 500 Pa
Pressure Measurement Accuracy: + / - 1% of reading +/- 1 digit
Volume Flow Accuracy: +/- 2.5% of reading +/- 1 digit
Resolution: 1 Pa
Sensor Damping: 0.5s to 7.5s
Power: 400w
Voltage Options: 110Vac 60/60 Hz
Unit Size: 35w x 46d x 80h (cm) - Weight: 20kg
Carry Case Size: 45w x 45d x 55h (cm) - Weight: 10.5kg
Trolley size: 38w x 20d x 94h (cm) - Weight: 6.7kg
Power 1.8kw without AVM / 1.9kw with AVM
Drive with single-phase AC motor
Built in electronic variable cutting speed with restart inhibitor: 65 – 215 rpm
Protection Class: Double insulated according to class II
Noise Level: 79dB(A)
Hand Arm Vibration Guide: no more than 8 hours continuous use.
Noise Level: 75db(A)
Hire Code: 220080
ORBITALUM RA4 Axial Pipe Cutter 110v 4″
Related Products.
Replacement Cutting Blades available to Purchase.
