- Cuts 1 1/2"-6" clay, cast-iron clay pipe or cement pipe and 4" Class 22 water main.
- Ratchet-action handle parallel to pipe allows for application in minimum width trenches.
- Complete with hand guard to protect operator’s knuckles when cutting.
Capacity: 1 1/2" - 6" (40-150mm)
Weight: 25lb (11.3kg)
**Do not use more than one chain extension except for clay pipe up to 15**
- Portable & Lightweight, Single person lift.
- Everything pre-connected & ready to use.
- Rapid change Conical Inlet Nozzles.
- Easy to use single instrument panel with menu driven interface.
- Configurable settings include:
Ambient conditions, sensor damping, units of measure,
data record rate.
- Able to measure flow in STD conditions or Actual conditions.
Four operating languages: English, German & Spanish
Only return the electronic instrument panel for annual calibration.
- Entire unit can fit in the boot of a small hatchback car
Standards: EN 1507/12237, DW/143, SMACNA
Volume Measurement: 1 to 150 L/s – over Nozzle Range
Typical Duty Points: 70 L/S at 2000 Pa – 140 L/s at 500 Pa
Pressure Measurement Accuracy: + / - 1% of reading +/- 1 digit
Volume Flow Accuracy: +/- 2.5% of reading +/- 1 digit
Resolution: 1 Pa
Sensor Damping: 0.5s to 7.5s
Power: 400w
Voltage Options: 110Vac 60/60 Hz
Unit Size: 35w x 46d x 80h (cm) - Weight: 20kg
Carry Case Size: 45w x 45d x 55h (cm) - Weight: 10.5kg
Trolley size: 38w x 20d x 94h (cm) - Weight: 6.7kg
Manual Cast Iron Snap Cutter, Wrap around chain, cuts into the material, ratchet pressure snaps it.
Easy to use, 6″ capacity.
Capacity can be increased by addding a chain extension
Hire Code: 250007
Cast Iron Snap Cutter
