- No tools are required for adjustment of the angle of the fence. Angle adjustment of the fence can be made by loosening the lever.
- With Quick vise.
- Aluminium base.
- Dust tray can be dismounted from the machine.
- Chip saw blade 305mm.
- Carrying handle.
- Shaft Lock.
- Anti-Vibration for chip saw, for decrease the noise during the work, and it contributes to saving of the life of saw blade.
Depth of Cut @ 90°: 115mm
Depth of Cut @ 45º: 90mm
Hole Diameter: 25.4mm
Max Wheel Diameter: 305mm
Input wattage: 1650w
No Load Speed: 1300rpm
Vibration K factor: 1.5m/sec2
Vibration No Load: 3/m/sec2
Net Weight: 19kgs
- Portable & Lightweight, Single person lift.
- Everything pre-connected & ready to use.
- Rapid change Conical Inlet Nozzles.
- Easy to use single instrument panel with menu driven interface.
- Configurable settings include:
Ambient conditions, sensor damping, units of measure,
data record rate.
- Able to measure flow in STD conditions or Actual conditions.
Four operating languages: English, German & Spanish
Only return the electronic instrument panel for annual calibration.
- Entire unit can fit in the boot of a small hatchback car
Standards: EN 1507/12237, DW/143, SMACNA
Volume Measurement: 1 to 150 L/s – over Nozzle Range
Typical Duty Points: 70 L/S at 2000 Pa – 140 L/s at 500 Pa
Pressure Measurement Accuracy: + / - 1% of reading +/- 1 digit
Volume Flow Accuracy: +/- 2.5% of reading +/- 1 digit
Resolution: 1 Pa
Sensor Damping: 0.5s to 7.5s
Power: 400w
Voltage Options: 110Vac 60/60 Hz
Unit Size: 35w x 46d x 80h (cm) - Weight: 20kg
Carry Case Size: 45w x 45d x 55h (cm) - Weight: 10.5kg
Trolley size: 38w x 20d x 94h (cm) - Weight: 6.7kg
This chopsaw has the advantage of a TCT blade, which reduces sparking whilst cutting.
The blade is an accessory, and should be ordered seperately.
Hand Arm Vibration Guide: no more than 8 hours continuous use.
Noise Level: 107db(A)
Hire Code: 220015
Drycut Chopsaw (TCT Blade) 110v
Related Products.
TCT Blades available to Purchase
